ELECTRICAL SAFETY
ELECTRICAL SAFETY TRAINING FOR ELECTRICIANS
Duration : 3 days
Objectives :
- To be able to carry out safely the operations on Low and/or High Voltage electrical equipments and installations
Targeted people: Electricians in charge of various works, fixing or other operations on electrical systems
ELECTRICAL SAFETY
BASICS IN ELECTRICITY AND ELECTRICAL SAFETY
Duration : 4 days
Objectives :
To be able to:
- to define the basics of electricity and the principles of the functioning of usual electrical equipments
- to identify the principles of the design of electrical installations and the inconvenient linked to a poor installation
- to recognize the importance of protecting and maintaining electrical equipments
- to identify and evaluate the risks linked to electricity, to develop ones awareness and to know how to react in case of accidents
Targeted people: Technicians in charge of operating or maintaining electrical installations
ELECTRICAL SAFETY
ELECTRICAL SAFETY TRAINING FOR NON ELECTRICIANS
Duration : 2 days
Objectives :
To be able to:
- To be able to carry out safely non-electrical operations in the vicinity of bear live parts
Targeted people: Non electricians working in zones subject to electrical risks.
ELECTRICAL SAFETY
ELECTRICAL INSTALLATIONS IN PREMISES AND SITES SUBJECT TO RISKS OF EXPLOSION
Duration :3 days
Objectives :
To be able :
- to choose the material to use in zones presenting risks of explosion
- to maintain the material following the ATEX directives
- to set up the materials and equipments according to various technologies
Targeted people: Staff in charge of maintenance, electricians, project managers.
SCAFFOLD
ASSEMBLERS-USERS OF FIX SCAFFOLDS
Duration :2,5 days
Objectives :
To be able:
- to put up/take down a type of fix scaffold of the firm in total respect of safety and prevention rules
- to realize a daily verification
- to use one type of fix scaffold of the firm in total respect of safety and prevention rules
Targeted people: People capable of putting up and using fix scaffold.
SCAFFOLD
ASSEMBLERS-USERS OF MOVING SCAFFOLDS
Duration :2,5 days
Objectives :
To be able:
- to put up/take down a type of moving scaffold of the firm in total respect of safety and prevention rules
- to realize a daily verification
- to use one type of moving scaffold of the firm in total respect of safety and prevention rules
Targeted people: People capable of putting up moving scaffold.
SCAFFOLD
PLATFORMS HANGED BY HOISTS AND CABLES
Duration :1 jour
Objectives :
To be able :
- to identify and evaluate the risks linked to the use of a hanging platform according to the environment
- to recognize the safety measures taken for the hanging platform
- to operate safely the machine
Targeted people: People capable of using a hanging platform.
LIFTING
MOBILE CONVEYOR CRANES AND SLINGING
Duration :2,5 days
Objectives :
- To understand the functioning of mobile conveyor cranes and the theory of the operation of the slinging of various loads
- To acquire good habits (in regard of regulations and for a maximum of safety) for the manipulation, verification and slinging of conveyor cranes
Targeted people:
- Mobile conveyor crane operators, staff in charge of slinging, managers of teams of mobile conveyor crane operators or responsible of slinging
- Staff in charge of the maintenance of mobile conveyor cranes
LIFTING
MOBILE CRANES
Experienced drivers
Duration :3 days
Objectives :
- To be able to drive a mobile crane in total respect of safety rules
- The participants will have to wear their work gowns, safety shoes, gloves and helmet
Targeted people : Experienced mobile crane drivers.
LIFTING
FORK-LIFTS
(Formation pour conducteurs expérimentés)
Duration :3 days
Objectives :
- To understand the functioning of fork-lifts
- To acquire good habits (in regard of regulations and for a maximum of safety) for the manipulation, verification and maintenance of fork-lifts
Targeted people:
- Experienced fork-lift drivers
- Managers of teams of fork-lift drivers
LIFTING
TOWER RANES
(Experienced drivers)
Duration :3 days
Objectives :
- To be able to drive a tower crane in respect of safety rules
Targeted people:
- People having significant experience in tower crane driving
- Staff in charge of the maintenance of tower cranes
LIFTING
PREPARATION FOR AUTHORIZATION TO WORK IN HEIGHT
Duration :2 days
Objectives :
To be able:
- to identify and evaluate the risks of falls according to the site, the environment and the nature of the work
- to master the safety principles relating to accesses, works and moving in heights
- to recognize the suitable means of protection for the work conditions (collective and individual protection)
- to use the individual protection equipments
Targeted people:
People working at considerable heights, either permanently or occasionally.
LIFTING
MACHINES USED ON SITES
Experienced drives
Duration :2,5 days
Objectives :
- To be able to apply the safety rules when driving the various machines used on sites
Targeted people:
People used to drive machines on sites.
LIFTING
LIFTS AND ELEVATORS-PROTECTION AND EVACUATION OF USERS BY PUTTING UP TO LEVEL
Duration :1 jour
Objectives :
- To be able to realize the operations to be done by lifts and elevators’ users when incidents or breakdowns occur
Targeted people:
Security guards, caretakers, people in charge of the maintenance.
PRESSURE
AUTOCLAVE HANDLING IN INDUSTRIES
Duration :3 days
Objectives :
To be able :
- to define the various principles for the functioning of these devices
- to handle autoclaves in total respect of the safety instructions, operation rules and control procedures
- to reduce the importance and frequency of irregularities occurring during the process of sterilization
- to improve quality by increasing the precision while the tasks are realized
- to define the aims and principles of sterilization
Targeted people:
Staff handling autoclaves and sterilization users. Staff in charge of the maintenance of autoclaves.
PRESSURE
CONDUITE D’EQUIPEMENTS SOUS PRESSURE
Duration :2 days
Objectives :
To be able:
- to recognize the main components of pressure equipments
- to identify the risks linked to pressure while handling these equipments
- to show initiative to fight the risks of pressure
Targeted people: Staff handling pressure equipment (except staff handling boilers or autoclave handlers, for whom specialized trainings are available).
PRESSURE
SAFETY OF PERSONS WORKING ON REFRIGERATED INSTALLATIONS CONTAINING AMMONIA
Duration :2 days
Objectives :
To be able:
- to estimate the risks linked to the use of ammonia in refrigerated installations
- to estimate the risks of refrigerated installations
- to apply safety instructions
- to have means of protection and of intervention
Targeted people: Staff working in production, handlers and supervisors, staff intervening on refrigerated equipments.
HEALTH AND SAFETY
POSTURES AND MOVEMENTS
Manual techniques for handling
Duration : 2 days
Objectives :
- To acquire gestural and technical skills and to apply them in handling situations which are susceptible of being harmful to one’s health
- To spot risky situations inherent to the work
Targeted people:
All persons whose work is comprised of the manual handling of loads.
HEALTH AND SAFETY
CHEMICAL RISKS
Duration :2 days
Objectives :
To be able:
- to identify the chemical risk
- to define the essential means of protection of personnel and to apply the safety instructions and measures
Targeted people:
Supervisors in chemical and petrochemical industries, staff having to handle, use and store chemical products.
HEALTH AND SAFETY
FIRST AIDERS ON WORK PREMISES
Duration :2 days
Objectives :
- To identify the persistent risks so as to protect a victim, to examine him and alert rescuers
- To give the first aid by carrying the appropriate action according to the state of a victim
Targeted people:
All people being a first aider on his work premises.
HEALTH AND SAFETY
MANAGING THE RISK OF ASBESTOS
Activities and interventions on materials where asbestos fibers may be released
Duration :2 days
Objectives :
To be able :
- to recognize the duty of owners of buildings and of ship builders to search for products or materials containing asbestos
- to recognize and make use of official documents linked to asbestos
- to cite the duties of employers face to the protection of workers
- to recognize which operations may release asbestos fibers
- to elaborate and define adapted procedures for the interventions
Targeted people: Managing staff. All people whose activity is to prepare and follow operations and/or maintenance interventions on materials which may contain asbestos.
Fire safety
Fire safety :
First intervention team
Duration :2 days
Objectives
To be able to fight against a fire start
Targeted people:
All public, particularly personnel of first intervention teams.
|
